AI Video Tools

Explore the best AI Video Tools — independent reviews, comparisons, pricing and step-by-step how-to guides, curated by Aizhi.

• 

  Histogram of oriented displacements

  Histogram of oriented displacements (HOD) is a 2D trajectory descriptor. The trajectory is described using a histogram of the directions between each two consecutive points. Given a trajectory T = {P1, P2, P3, ..., Pn}, where Pt is the 2D position at time t. For each pair of positions Pt and Pt+1, calculate the direction angle θ(t, t+1). Value of θ is between 0 and 360. A histogram of the quantized values of θ is created. If the histogram is of 8 bins, the first bin represents all θs between 0 and 45. The histogram accumulates the lengths of the consecutive moves. For each θ, a specific histogram bin is determined. The length of the line between Pt and Pt+1 is then added to the specific histogram bin. To show the intuition behind the descriptor, consider the action of waving hands. At the end of the action, the hand falls down. When describing this down movement, the descriptor does not care about the position from which the hand started to fall. This fall will affect the histogram with the appropriate angles and lengths, regardless of the position where the hand started to fall. HOD records for each moving point: how much it moves in each range of directions. HOD has a clear physical interpretation. It proposes that, a simple way to describe the motion of an object, is to indicate how much distance it moves in each direction. If the movement in all directions are saved accurately, the movement can be repeated from the initial position to the final destination regardless of the displacements order. However, the temporal information will be lost, as the order of movements is not stored-this is what we solve by applying the temporal pyramid, as shown in section \ref{sec:temp-pyramid}. If the angles quantization range is small, classifiers that use the descriptor will overfit. Generalization needs some slack in directions-which can be done by increasing the quantization range.

  Read more →
• 

  Knuth–Plass line-breaking algorithm

  The Knuth–Plass algorithm is a line-breaking algorithm designed for use in Donald Knuth's typesetting program TeX. It integrates the problems of text justification and hyphenation into a single algorithm by using a discrete dynamic programming method to minimize a loss function that attempts to quantify the aesthetic qualities desired in the finished output. The algorithm works by dividing the text into a stream of three kinds of objects: boxes, which are non-resizable chunks of content, glue, which are flexible, resizeable elements, and penalties, which represent places where breaking is undesirable (or, if negative, desirable). The loss function, known as "badness", is defined in terms of the deformation of the glue elements, and any extra penalties incurred through line breaking. Making hyphenation decisions follows naturally from the algorithm, but the choice of possible hyphenation points within words, and optionally their preference weighting, must be performed first, and that information inserted into the text stream in advance. Knuth and Plass' original algorithm does not include page breaking, but may be modified to interface with a pagination algorithm, such as the algorithm designed by Plass in his PhD thesis. Typically, the cost function for this technique should be modified so that it does not count the space left on the final line of a paragraph; this modification allows a paragraph to end in the middle of a line without penalty. The same technique can also be extended to take into account other factors such as the number of lines or costs for hyphenating long words. == Computational complexity == A naive brute-force exhaustive search for the minimum badness by trying every possible combination of breakpoints would take an impractical O ( 2 n ) {\displaystyle O(2^{n})} time. The classic Knuth-Plass dynamic programming approach to solving the minimization problem is a worst-case O ( n 2 ) {\displaystyle O(n^{2})} algorithm but usually runs much faster, in close to linear time. Solving for the Knuth-Plass optimum can be shown to be a special case of the convex least-weight subsequence problem, which can be solved in O ( n ) {\displaystyle O(n)} time. Methods to do this include the SMAWK algorithm. == Simple example of minimum raggedness metric == For the input text AAA BB CC DDDDD with line width 6, a greedy algorithm that puts as many words on a line as possible while preserving order before moving to the next line, would produce: ------ Line width: 6 AAA BB Remaining space: 0 CC Remaining space: 4 DDDDD Remaining space: 1 The sum of squared space left over by this method is 0 2 + 4 2 + 1 2 = 17 {\displaystyle 0^{2}+4^{2}+1^{2}=17} . However, the optimal solution achieves the smaller sum 3 2 + 1 2 + 1 2 = 11 {\displaystyle 3^{2}+1^{2}+1^{2}=11} : ------ Line width: 6 AAA Remaining space: 3 BB CC Remaining space: 1 DDDDD Remaining space: 1 The difference here is that the first line is broken before BB instead of after it, yielding a better right margin and a lower cost 11.

  Read more →
• 

  Australian Geoscience Data Cube

  The Australian Geoscience Data Cube (AGDC) is an approach to storing, processing and analyzing large collections of Earth observation data. The technology is designed to meet challenges of national interest by being agile and flexible with vast amounts of layered grid data. The AGDC reduces processing time of traditional image analysis by calibrating, pre-computing known extents, pixel alignment and storing metadata in a cell lattice structure. The temporal-pixel aligned data can often be analysed faster across space and time dimensions than previous scene based techniques. This allows the AGDC to be flexible in tackling future challenges and improve analysis times on every-increasing data repositories of earth observation. The AGDC has also been used internationally to allow countries to maintain ecologically sustainable programs and reduce the difficulty curve of utilizing Remote Sensing data. == Background == The AGDC was originally conceived by Geoscience Australia but is now maintained in a partnership between Geoscience Australia, Commonwealth Scientific and Industrial Research Organisation (CSIRO) and National Computational Infrastructure National Facility (Australia) (NCI). This is made possible by the funding from the partnership and a number of organisations such as National Collaborative Research Infrastructure Strategy (NCRIS). == Analysis ready data, ingestion and indexing == The data processed in the cube is made analysis ready before being ingested and indexed into the AGDC. Analysis ready data is pre-processed data that has applied corrections for instrument calibration (gains and offsets), geolocation (spatial alignment) and radiometry (solar illumination, incidence angle, topography, atmospheric interference). The ingestion process manages the translation of datasets into the storage units while maintaining a database index. The data within the storage and index can be accessed via API calls often compiled within code such as Python (programming language). Example: s2a_l1c = dc.load(product='s2a_level1c_granule',x=(147.36, 147.41), y=(-35.1, -35.15), measurements=['04','03','02'], output_crs='EPSG:4326', resolution=(-0.00025,0.00025)) === Datasets currently stored === Geoscience Australia Landsat Surface Reflectance (1987 to present) Landsat Pixel Quality Landsat Fractional Cover Landsat NDVI === Datasets that have been piloted === USGS Landsat Surface Reflectance SRTM DEM Himawari 8 MODIS Sentinel-2 L1C / S2A Australian Gridded Climate Data == Open source == The AGDC code base is situated in GitHub as an open repository. The core code base moved to the Open Data Cube in early 2017 as part of an international collaboration. Whilst the code base is the Open Data Cube, individual cubes exist as their own right such as the AGDC on the National Computational Infrastructure National Facility (Australia) (NCI) using the High-Performance Computing Cluster HPCC. The core code can be installed on personal computers or public computers (using git) and has many unit tests. Documentation for the code base exists on Read the Docs. == Challenges of the AGDC == The AGDC is designed to meet nationally significant challenges such as the following. Sustainability Environment Water resource management Disaster assist Policy development Community planning Forest preservation Carbon measurement == International awards == The AGDC won the 2016 Content Platform of the Year award from Geospatial World Forum.

  Read more →
• 

  Documentalist

  A documentalist is a professional, trained in documentation science and specializing in assisting researchers in their search for scientific and technical documentation. With the development of bibliographical databases such as MEDLINE, documentalists were professionals who searched such databases on the behalf of users. When the field of documentation changed its name to information science, the terms information specialist or information professional often replaced the term documentalist.

  Read more →
• 

  Application permissions

  Permissions are a means of controlling and regulating access to specific system- and device-level functions by software. Typically, types of permissions cover functions that may have privacy implications, such as the ability to access a device's hardware features (including the camera and microphone), and personal data (such as storage devices, contacts lists, and the user's present geographical location). Permissions are typically declared in an application's manifest, and certain permissions must be specifically granted at runtime by the user—who may revoke the permission at any time. Permission systems are common on mobile operating systems, where permissions needed by specific apps must be disclosed via the platform's app store. == Mobile devices == On mobile operating systems for smartphones and tablets, typical types of permissions regulate: Access to storage and personal information, such as contacts, calendar appointments, etc. Location tracking. Access to the device's internal camera and/or microphone. Access to biometric sensors, including fingerprint readers and other health sensors.. Internet access. Access to communications interfaces (including their hardware identifiers and signal strength where applicable, and requests to enable them), such as Bluetooth, Wi-Fi, NFC, and others. Making and receiving phone calls. Sending and reading text messages The ability to perform in-app purchases. The ability to "overlay" themselves within other apps. Installing, deleting and otherwise managing applications. Authentication tokens (e.g., OAuth tokens) from web services stored in system storage for sharing between apps. Prior to Android 6.0 "Marshmallow", permissions were automatically granted to apps at runtime, and they were presented upon installation in Google Play Store. Since Marshmallow, certain permissions now require the app to request permission at runtime by the user. These permissions may also be revoked at any time via Android's settings menu. Usage of permissions on Android are sometimes abused by app developers to gather personal information and deliver advertising; in particular, apps for using a phone's camera flash as a flashlight (which have grown largely redundant due to the integration of such functionality at the system level on later versions of Android) have been known to require a large array of unnecessary permissions beyond what is actually needed for the stated functionality. iOS imposes a similar requirement for permissions to be granted at runtime, with particular controls offered for enabling of Bluetooth, Wi-Fi, and location tracking. == WebPermissions == WebPermissions is a permission system for web browsers. When a web application needs some data behind permission, it must request it first. When it does it, a user sees a window asking him to make a choice. The choice is remembered, but can be cleared lately. Currently the following resources are controlled: geolocation desktop notifications service workers sensors audio capturing devices, like sound cards, and their model names and characteristics video capturing devices, like cameras, and their identifiers and characteristics == Analysis == The permission-based access control model assigns access privileges for certain data objects to application. This is a derivative of the discretionary access control model. The access permissions are usually granted in the context of a specific user on a specific device. Permissions are granted permanently with few automatic restrictions. In some cases permissions are implemented in 'all-or-nothing' approach: a user either has to grant all the required permissions to access the application or the user can not access the application. There is still a lack of transparency when the permission is used by a program or application to access the data protected by the permission access control mechanism. Even if a user can revoke a permission, the app can blackmail a user by refusing to operate, for example by just crashing or asking user to grant the permission again in order to access the application. The permission mechanism has been widely criticized by researchers for several reasons, including; Intransparency of personal data extraction and surveillance, including the creation of a false sense of security; End-user fatigue of micro-managing access permissions leading to a fatalistic acceptance of surveillance and intransparency; Massive data extraction and personal surveillance carried out once the permissions are granted. Some apps, such as XPrivacy and Mockdroid spoof data in order to act as a measure for privacy. Further transparency methods include longitudinal behavioural profiling and multiple-source privacy analysis of app data access.

  Read more →
• 

  Knuth–Eve algorithm

  In computer science, the Knuth–Eve algorithm is an algorithm for polynomial evaluation. It preprocesses the coefficients of the polynomial to reduce the number of multiplications required at runtime. Ideas used in the algorithm were originally proposed by Donald Knuth in 1962. His procedure opportunistically exploits structure in the polynomial being evaluated. In 1964, James Eve determined for which polynomials this structure exists, and gave a simple method of "preconditioning" polynomials (explained below) to endow them with that structure. == Algorithm == === Preliminaries === Consider an arbitrary polynomial p ∈ R [ x ] {\displaystyle p\in \mathbb {R} [x]} of degree n {\displaystyle n} . Assume that n ≥ 3 {\displaystyle n\geq 3} . Define m {\displaystyle m} such that: if n {\displaystyle n} is odd then n = 2 m + 1 {\displaystyle n=2m+1} , and if n {\displaystyle n} is even then n = 2 m + 2 {\displaystyle n=2m+2} . Unless otherwise stated, all variables in this article represent either real numbers or univariate polynomials with real coefficients. All operations in this article are done over R {\displaystyle \mathbb {R} } . Again, the goal is to create an algorithm that returns p ( x ) {\displaystyle p(x)} given any x {\displaystyle x} . The algorithm is allowed to depend on the polynomial p {\displaystyle p} itself, since its coefficients are known in advance. === Overview === ==== Key idea ==== Using polynomial long division, we can write p ( x ) = q ( x ) ⋅ ( x 2 − α ) + ( β x + γ ) , {\displaystyle p(x)=q(x)\cdot (x^{2}-\alpha )+(\beta x+\gamma ),} where x 2 − α {\displaystyle x^{2}-\alpha } is the divisor. Picking a value for α {\displaystyle \alpha } fixes both the quotient q {\displaystyle q} and the coefficients in the remainder β {\displaystyle \beta } and γ {\displaystyle \gamma } . The key idea is to cleverly choose α {\displaystyle \alpha } such that β = 0 {\displaystyle \beta =0} , so that p ( x ) = q ( x ) ⋅ ( x 2 − α ) + γ . {\displaystyle p(x)=q(x)\cdot (x^{2}-\alpha )+\gamma .} This way, no operations are needed to compute the remainder polynomial, since it's just a constant. We apply this procedure recursively to q {\displaystyle q} , expressing p ( x ) = ( ( q ( x ) ⋅ ( x 2 − α m ) + γ m ) ⋯ ) ⋅ ( x 2 − α 1 ) + γ 1 . {\displaystyle p(x)=\left(\left(q(x)\cdot (x^{2}-\alpha _{m})+\gamma _{m}\right)\cdots \right)\cdot (x^{2}-\alpha _{1})+\gamma _{1}.} After m {\displaystyle m} recursive calls, the quotient q {\displaystyle q} is either a linear or a quadratic polynomial. In this base case, the polynomial can be evaluated with (say) Horner's method. ==== "Preconditioning" ==== For arbitrary p {\displaystyle p} , it may not be possible to force β = 0 {\displaystyle \beta =0} at every step of the recursion. Consider the polynomials p e {\displaystyle p^{e}} and p o {\displaystyle p^{o}} with coefficients taken from the even and odd terms of p {\displaystyle p} respectively, so that p ( x ) = p e ( x 2 ) + x ⋅ p o ( x 2 ) . {\displaystyle p(x)=p^{e}(x^{2})+x\cdot p^{o}(x^{2}).} If every root of p o {\displaystyle p^{o}} is real, then it is possible to write p {\displaystyle p} in the form given above. Each α i {\displaystyle \alpha _{i}} is a different root of p o {\displaystyle p^{o}} , counting multiple roots as distinct. Furthermore, if at least n − 1 {\displaystyle n-1} roots of p {\displaystyle p} lie in one half of the complex plane, then every root of p o {\displaystyle p^{o}} is real. Ultimately, it may be necessary to "precondition" p {\displaystyle p} by shifting it — by setting p ( x ) ← p ( x + t ) {\displaystyle p(x)\gets p(x+t)} for some t {\displaystyle t} — to endow it with the structure that most of its roots lie in one half of the complex plane. At runtime, this shift has to be "undone" by first setting x ← x − t {\displaystyle x\gets x-t} . === Preprocessing step === The following algorithm is run once for a given polynomial p {\displaystyle p} . At this point, the values of x {\displaystyle x} that p {\displaystyle p} will be evaluated on are not known. ==== Better choice of t ==== While any t ≥ Re ( r 2 ) {\displaystyle t\geq {\text{Re}}(r_{2})} can work, it is possible to remove one addition during evaluation if t {\displaystyle t} is also chosen such that two roots of p ( x + t ) {\displaystyle p(x+t)} are symmetric about the origin. In that case, α 1 {\displaystyle \alpha _{1}} can be chosen such that the shifted polynomial has a factor of x 2 − α 1 {\displaystyle x^{2}-\alpha _{1}} , so γ 1 = 0 {\displaystyle \gamma _{1}=0} . It is always possible to find such a t {\displaystyle t} . One possible algorithm for choosing t {\displaystyle t} is: === Evaluation step === The following algorithm evaluates p {\displaystyle p} at some, now known, point x {\displaystyle x} . Assuming t {\displaystyle t} is chosen optimally, γ 1 = 0 {\displaystyle \gamma _{1}=0} . So, the final iteration of the loop can instead run y ← y ⋅ ( s − α i ) , {\displaystyle y\gets y\cdot (s-\alpha _{i}),} saving an addition. == Analysis == In total, evaluation using the Knuth–Eve algorithm for a polynomial of degree n {\displaystyle n} requires n {\displaystyle n} additions and ⌊ n / 2 ⌋ + 2 {\displaystyle \lfloor n/2\rfloor +2} multiplications, assuming t {\displaystyle t} is chosen optimally. No algorithm to evaluate a given polynomial of degree n {\displaystyle n} can use fewer than n {\displaystyle n} additions or fewer than ⌈ n / 2 ⌉ {\displaystyle \lceil n/2\rceil } multiplications during evaluation. This result assumes only addition and multiplication are allowed during both preprocessing and evaluation. The Knuth–Eve algorithm is not well-conditioned.

  Read more →
• 

  Manufacture Modules Technologies

  Manufacture Modules Technologies Sarl (MMT) is a Swiss company established in Geneva in 2015 which originally specialised in the development and commercialization of "Horological Smartwatch modules", firmware, apps and cloud. Located at Geneva's Skylab high-tech hub, it expanded into the development and manufacturing of "E-Straps" operated with a mobile application. Philippe Fraboulet is the CEO. == History == In June 2015, Fullpower Technologies and Union Horlogère Suisse (Swiss Watchmakers Corporation) formed MMT as a joint venture, which then launched the MotionX Horological Smartwatch Open Platform for the Swiss watch industry. The initial licensees were Frederique Constant, Alpina and Mondaine, brands owned by Union Horlogère Suisse. Fullpower created and managed the circuit design, firmware, smartphone applications (including sleep activity), as well as the cloud Infrastructure. MMT managed the Swiss watch movement development and production as well as licensing and support. In July 2016, Union Horlogere Holding and MMT were spun-out of the Frédérique Constant Group. Fullpower Technologies' 19.99% share was acquired by Union Horlogere Holding BV, giving it 100% of MMT's shares. == Business == The company offers firmware, a cloud, manufacturing, service and over-the-air facilities for upgrades. The company also offers its own apps, which bear the label “Swiss Made software”.

  Read more →
• 

  Semantic heterogeneity

  Semantic heterogeneity is when database schema or datasets for the same domain are developed by independent parties, resulting in differences in meaning and interpretation of data values. Beyond structured data, the problem of semantic heterogeneity is compounded due to the flexibility of semi-structured data and various tagging methods applied to documents or unstructured data. Semantic heterogeneity is one of the more important sources of differences in heterogeneous datasets. Yet, for multiple data sources to interoperate with one another, it is essential to reconcile these semantic differences. Decomposing the various sources of semantic heterogeneities provides a basis for understanding how to map and transform data to overcome these differences. == Classification == One of the first known classification schemes applied to data semantics is from William Kent in the late 80s. Kent's approach dealt more with structural mapping issues than differences in meaning, which he pointed to data dictionaries as potentially solving. One of the most comprehensive classifications is from Pluempitiwiriyawej and Hammer, "Classification Scheme for Semantic and Schematic Heterogeneities in XML Data Sources". They classify heterogeneities into three broad classes: Structural conflicts arise when the schema of the sources representing related or overlapping data exhibit discrepancies. Structural conflicts can be detected when comparing the underlying schema. The class of structural conflicts includes generalization conflicts, aggregation conflicts, internal path discrepancy, missing items, element ordering, constraint and type mismatch, and naming conflicts between the element types and attribute names. Domain conflicts arise when the semantics of the data sources that will be integrated exhibit discrepancies. Domain conflicts can be detected by looking at the information contained in the schema and using knowledge about the underlying data domains. The class of domain conflicts includes schematic discrepancy, scale or unit, precision, and data representation conflicts. Data conflicts refer to discrepancies among similar or related data values across multiple sources. Data conflicts can only be detected by comparing the underlying sources. The class of data conflicts includes ID-value, missing data, incorrect spelling, and naming conflicts between the element contents and the attribute values. Moreover, mismatches or conflicts can occur between set elements (a "population" mismatch) or attributes (a "description" mismatch). Michael Bergman expanded upon this schema by adding a fourth major explicit category of language, and also added some examples of each kind of semantic heterogeneity, resulting in about 40 distinct potential categories . This table shows the combined 40 possible sources of semantic heterogeneities across sources: A different approach toward classifying semantics and integration approaches is taken by Sheth et al. Under their concept, they split semantics into three forms: implicit, formal and powerful. Implicit semantics are what is either largely present or can easily be extracted; formal languages, though relatively scarce, occur in the form of ontologies or other description logics; and powerful (soft) semantics are fuzzy and not limited to rigid set-based assignments. Sheth et al.'s main point is that first-order logic (FOL) or description logic is inadequate alone to properly capture the needed semantics. == Relevant applications == Besides data interoperability, relevant areas in information technology that depend on reconciling semantic heterogeneities include data mapping, semantic integration, and enterprise information integration, among many others. From the conceptual to actual data, there are differences in perspective, vocabularies, measures and conventions once any two data sources are brought together. Explicit attention to these semantic heterogeneities is one means to get the information to integrate or interoperate. A mere twenty years ago, information technology systems expressed and stored data in a multitude of formats and systems. The Internet and Web protocols have done much to overcome these sources of differences. While there is a large number of categories of semantic heterogeneity, these categories are also patterned and can be anticipated and corrected. These patterned sources inform what kind of work must be done to overcome semantic differences where they still reside.

  Read more →
• 

  Client honeypot

  Honeypots are security devices whose value lie in being probed and compromised. Traditional honeypots are servers (or devices that expose server services) that wait passively to be attacked. Client Honeypots are active security devices in search of malicious servers that attack clients. The client honeypot poses as a client and interacts with the server to examine whether an attack has occurred. Often the focus of client honeypots is on web browsers, but any client that interacts with servers can be part of a client honeypot (for example ftp, email, ssh, etc.). There are several terms that are used to describe client honeypots. Besides client honeypot, which is the generic classification, honeyclient is the other term that is generally used and accepted. However, there is a subtlety here, as "honeyclient" is actually a homograph that could also refer to the first known open source client honeypot implementation (see below), although this should be clear from the context. == Architecture == A client honeypot is composed of three components. The first component, a queuer, is responsible for creating a list of servers for the client to visit. This list can be created, for example, through crawling. The second component is the client itself, which is able to make a requests to servers identified by the queuer. After the interaction with the server has taken place, the third component, an analysis engine, is responsible for determining whether an attack has taken place on the client honeypot. In addition to these components, client honeypots are usually equipped with some sort of containment strategy to prevent successful attacks from spreading beyond the client honeypot. This is usually achieved through the use of firewalls and virtual machine sandboxes. Analogous to traditional server honeypots, client honeypots are mainly classified by their interaction level: high or low; which denotes the level of functional interaction the server can utilize on the client honeypot. In addition to this there are also newly hybrid approaches which denotes the usage of both high and low interaction detection techniques. == High interaction == High interaction client honeypots are fully functional systems comparable to real systems with real clients. As such, no functional limitations (besides the containment strategy) exist on high interaction client honeypots. Attacks on high interaction client honeypots are detected via inspection of the state of the system after a server has been interacted with. The detection of changes to the client honeypot may indicate the occurrence of an attack against that has exploited a vulnerability of the client. An example of such a change is the presence of a new or altered file. High interaction client honeypots are very effective at detecting unknown attacks on clients. However, the tradeoff for this accuracy is a performance hit from the amount of system state that has to be monitored to make an attack assessment. Also, this detection mechanism is prone to various forms of evasion by the exploit. For example, an attack could delay the exploit from immediately triggering (time bombs) or could trigger upon a particular set of conditions or actions (logic bombs). Since no immediate, detectable state change occurred, the client honeypot is likely to incorrectly classify the server as safe even though it did successfully perform its attack on the client. Finally, if the client honeypots are running in virtual machines, then an exploit may try to detect the presence of the virtual environment and cease from triggering or behave differently. === Capture-HPC === Capture [1] is a high interaction client honeypot developed by researchers at Victoria University of Wellington, NZ. Capture differs from existing client honeypots in various ways. First, it is designed to be fast. State changes are being detected using an event based model allowing to react to state changes as they occur. Second, Capture is designed to be scalable. A central Capture server is able to control numerous clients across a network. Third, Capture is supposed to be a framework that allows to utilize different clients. The initial version of Capture supports Internet Explorer, but the current version supports all major browsers (Internet Explorer, Firefox, Opera, Safari) as well as other HTTP aware client applications, such as office applications and media players. === HoneyClient === HoneyClient [2] is a web browser based (IE/FireFox) high interaction client honeypot designed by Kathy Wang in 2004 and subsequently developed at MITRE. It was the first open source client honeypot and is a mix of Perl, C++, and Ruby. HoneyClient is state-based and detects attacks on Windows clients by monitoring files, process events, and registry entries. It has integrated the Capture-HPC real-time integrity checker to perform this detection. HoneyClient also contains a crawler, so it can be seeded with a list of initial URLs from which to start and can then continue to traverse web sites in search of client-side malware. === HoneyMonkey (dead since 2010) === HoneyMonkey [3] is a web browser based (IE) high interaction client honeypot implemented by Microsoft in 2005. It is not available for download. HoneyMonkey is state based and detects attacks on clients by monitoring files, registry, and processes. A unique characteristic of HoneyMonkey is its layered approach to interacting with servers in order to identify zero-day exploits. HoneyMonkey initially crawls the web with a vulnerable configuration. Once an attack has been identified, the server is reexamined with a fully patched configuration. If the attack is still detected, one can conclude that the attack utilizes an exploit for which no patch has been publicly released yet and therefore is quite dangerous. === SHELIA (dead since 2009) === Shelia [4] is a high interaction client honeypot developed by Joan Robert Rocaspana at Vrije Universiteit Amsterdam. It integrates with an email reader and processes each email it receives (URLs & attachments). Depending on the type of URL or attachment received, it opens a different client application (e.g. browser, office application, etc.) It monitors whether executable instructions are executed in data area of memory (which would indicate a buffer overflow exploit has been triggered). With such an approach, SHELIA is not only able to detect exploits, but is able to actually ward off exploits from triggering. === UW Spycrawler === The Spycrawler [5] developed at the University of Washington is yet another browser based (Mozilla) high interaction client honeypot developed by Moshchuk et al. in 2005. This client honeypot is not available for download. The Spycrawler is state based and detects attacks on clients by monitoring files, processes, registry, and browser crashes. Spycrawlers detection mechanism is event based. Further, it increases the passage of time of the virtual machine the Spycrawler is operating in to overcome (or rather reduce the impact of) time bombs. === Web Exploit Finder === WEF [6] is an implementation of an automatic drive-by-download – detection in a virtualized environment, developed by Thomas Müller, Benjamin Mack and Mehmet Arziman, three students from the Hochschule der Medien (HdM), Stuttgart during the summer term in 2006. WEF can be used as an active HoneyNet with a complete virtualization architecture underneath for rollbacks of compromised virtualized machines. == Low interaction == Low interaction client honeypots differ from high interaction client honeypots in that they do not utilize an entire real system, but rather use lightweight or simulated clients to interact with the server. (in the browser world, they are similar to web crawlers). Responses from servers are examined directly to assess whether an attack has taken place. This could be done, for example, by examining the response for the presence of malicious strings. Low interaction client honeypots are easier to deploy and operate than high interaction client honeypots and also perform better. However, they are likely to have a lower detection rate since attacks have to be known to the client honeypot in order for it to detect them; new attacks are likely to go unnoticed. They also suffer from the problem of evasion by exploits, which may be exacerbated due to their simplicity, thus making it easier for an exploit to detect the presence of the client honeypot. === HoneyC === HoneyC [7] is a low interaction client honeypot developed at Victoria University of Wellington by Christian Seifert in 2006. HoneyC is a platform independent open source framework written in Ruby. It currently concentrates driving a web browser simulator to interact with servers. Malicious servers are detected by statically examining the web server's response for malicious strings through the usage of Snort signatures. === Monkey-Spider (dead since 2008) === Monkey-Spider [8] is a low-interaction client honeypot i

  Read more →
• 

  Informedia Digital Library

  The Informedia Digital Library is an ongoing research program at Carnegie Mellon University to build search engines and information visualization technology for many types of media. The program has carried out research on spoken document retrieval, video information retrieval, video segmentation, face recognition, and cross-language information retrieval. The Lycos search engine was an early product of the Informedia Digital Library Project. The project is led by Howard Wactlar. Researchers on the project have included: Michael Mauldin, Alex Hauptmann, Michael Christel, Michael Witbrock, Raj Reddy, Takeo Kanade and Scott Stevens.

  Read more →
• 

  Enterprise information system

  An Enterprise Information System (EIS) is any kind of information system which improves the functions of enterprise business processes through integration. This means typically offering high quality service, dealing with large volumes of data and capable of supporting some large and possibly complex organization or enterprise. An EIS must be able to be used by all parts and all levels of an enterprise. The word enterprise can have various connotations. Frequently the term is used only to refer to very large organizations such as multi-national companies or public-sector organizations. However, the term may be used to mean virtually anything, by virtue of it having become a corporate-speak buzzword. == Purpose == Enterprise information systems provide a technology platform that enables organizations to integrate and coordinate their business processes on a robust foundation. An EIS is currently used in conjunction with customer relationship management and supply chain management to automate business processes. An enterprise information system provides a single system that is central to the organization that ensuring information can be shared across all functional levels and management hierarchies. An EIS can be used to increase business productivity and reduce service cycles, product development cycles and marketing life cycles. It may be used to amalgamate existing applications. Other outcomes include higher operational efficiency and cost savings. Financial value is not usually a direct outcome from the implementation of an enterprise information system. == Design stage == At the design stage the main characteristic of EIS efficiency evaluation is the probability of timely delivery of various messages such as command, service, etc. == Information systems == Enterprise systems create a standard data structure and are invaluable in eliminating the problem of information fragmentation caused by multiple information systems within an organization. An EIS differentiates itself from legacy systems in that it is self-transactional, self-helping and adaptable to general and specialist conditions. Unlike an enterprise information system, legacy systems are limited to department-wide communications. A typical enterprise information system would be housed in one or more data centers, would run enterprise software, and could include applications that typically cross organizational borders such as content management systems.

  Read more →
• 

  Wearable computer

  A wearable computer, also known as a body-borne computer or wearable, is a computing device worn on the body. The definition of 'wearable computer' may be narrow or broad, extending to smartphones or even ordinary wristwatches. Wearables may be for general use, in which case they are just a particularly small example of mobile computing. Alternatively, they may be for specialized purposes such as fitness trackers. They may incorporate special sensors such as accelerometers, heart rate monitors, or on the more advanced side, electrocardiogram (ECG) and blood oxygen saturation (SpO2) monitors. Under the definition of wearable computers, we also include novel user interfaces such as Google Glass, an optical head-mounted display controlled by gestures. It may be that specialized wearables will evolve into general all-in-one devices, as happened with the convergence of PDAs and mobile phones into smartphones. Wearables are typically worn on the wrist (e.g. fitness trackers), hung from the neck (like a necklace), strapped to the arm or leg (electronic tagging), or on the head (as glasses or a helmet), though some have been located elsewhere (e.g. on a finger or in a shoe). Devices carried in a pocket or bag – such as smartphones and before them, pocket calculators and PDAs, may or may not be regarded as 'worn'. Wearable computers have various technical issues common to other mobile computing, such as batteries, heat dissipation, software architectures, wireless and personal area networks, and data management. Many wearable computers are active all the time, e.g. processing or recording data continuously. == Applications == Wearable computers are not only limited to computers such as fitness trackers that are worn on wrists; they also include wearables such as heart pacemakers and other prosthetics. They are used most often in research that focuses on behavioral modeling, health monitoring systems, IT and media development, where the person wearing the computer actually moves or is otherwise engaged with his or her surroundings. Wearable computers have been used for the following: general-purpose computing (e.g. smartphones and smartwatches) sensory integration, e.g. to help people see better or understand the world better (whether in task-specific applications like camera-based welding helmets or for everyday use like Google Glass) behavioral modeling health care monitoring systems service management electronic textiles and fashion design, e.g. Microsoft's 2011 prototype "The Printing Dress". Wearable computing is the subject of active research, especially the form-factor and location on the body, with areas of study including user interface design, augmented reality, and pattern recognition. The use of wearables for specific applications, for compensating disabilities or supporting elderly people steadily increases. == Operating systems == The dominant operating systems for wearable computing are: FreeRTOS is a real-time operating system kernel for embedded devices; most of the Smartbands that are currently available in the market are based on FreeRTOS, which include Huawei, Honor, Lenovo, realme, TCL and Xiaomi smartbands. LiteOS is a lightweight open source real-time operating system that is part of Huawei's "1+8+N" Internet of Things solution. Tizen OS from Samsung (there was an announcement in May 2021 that Wear OS and Tizen OS will merge and will be called simply Wear.) watchOS watchOS is a proprietary mobile operating system developed by Apple Inc. to run on the Apple Watch. Wear OS Wear OS (previously known as Android Wear) is a smartwatch operating system developed by Google Inc. == History == Due to the varied definitions of wearable and computer, the first wearable computer could be as early as the first abacus on a necklace, a 16th-century abacus ring, a wristwatch and 'finger-watch' owned by Queen Elizabeth I of England, or the covert timing devices hidden in shoes to cheat at roulette by Thorp and Shannon in the 1960s and 1970s. However, a general-purpose computer is not merely a time-keeping or calculating device, but rather a user-programmable item for arbitrary complex algorithms, interfacing, and data management. By this definition, the wearable computer was invented by Steve Mann, in the late 1970s: Steve Mann, a professor at the University of Toronto, was hailed as the father of the wearable computer and the ISSCC's first virtual panelist, by moderator Woodward Yang of Harvard University (Cambridge Mass.). The development of wearable items has taken several steps of miniaturization from discrete electronics over hybrid designs to fully integrated designs, where just one processor chip, a battery, and some interface conditioning items make the whole unit. === 1500s === Queen Elizabeth I of England received a watch from Robert Dudley in 1571, as a New Year's present; it may have been worn on the forearm rather than the wrist. She also possessed a 'finger-watch' set in a ring, with an alarm that prodded her finger. === 1600s === The Qing dynasty saw the introduction of a fully functional abacus on a ring, which could be used while it was being worn. === 1960s === In 1961, mathematicians Edward O. Thorp and Claude Shannon built some computerized timing devices to help them win a game of roulette. One such timer was concealed in a shoe and another in a pack of cigarettes. Various versions of this apparatus were built in the 1960s and 1970s. Thorp refers to himself as the inventor of the first "wearable computer". In other variations, the system was a concealed cigarette-pack-sized analog computer designed to predict the motion of roulette wheels. A data-taker would use microswitches hidden in his shoes to indicate the speed of the roulette wheel, and the computer would indicate an octant of the roulette wheel to bet on by sending musical tones via radio to a miniature speaker hidden in a collaborator's ear canal. The system was successfully tested in Las Vegas in June 1961, but hardware issues with the speaker wires prevented it from being used beyond test runs. This was not a wearable computer because it could not be re-purposed during use; rather it was an example of task-specific hardware. This work was kept secret until it was first mentioned in Thorp's book Beat the Dealer (revised ed.) in 1966 and later published in detail in 1969. === 1970s === Pocket calculators became mass-market devices in 1970, starting in Japan. Programmable calculators followed in the late 1970s, being somewhat more general-purpose computers. The HP-01 algebraic calculator watch by Hewlett-Packard was released in 1977. A camera-to-tactile vest for the blind, launched by C.C. Collins in 1977, converted images into a 1024-point, ten-inch square tactile grid on a vest. === 1980s === The 1980s saw the rise of more general-purpose wearable computers. In 1981, Steve Mann designed and built a backpack-mounted 6502-based wearable multimedia computer with text, graphics, and multimedia capability, as well as video capability (cameras and other photographic systems). Mann went on to be an early and active researcher in the wearables field, especially known for his 1994 creation of the Wearable Wireless Webcam, the first example of lifelogging. Seiko Epson released the RC-20 Wrist Computer in 1984. It was an early smartwatch, powered by a computer on a chip. In 1989, Reflection Technology marketed the Private Eye head-mounted display, which scans a vertical array of LEDs across the visual field using a vibrating mirror. This display gave rise to several hobbyist and research wearables, including Gerald "Chip" Maguire's IBM/Columbia University Student Electronic Notebook, Doug Platt's Hip-PC, and Carnegie Mellon University's VuMan 1 in 1991. The Student Electronic Notebook consisted of the Private Eye, Toshiba diskless AIX notebook computers (prototypes), a stylus based input system and a virtual keyboard. It used direct-sequence spread spectrum radio links to provide all the usual TCP/IP based services, including NFS mounted file systems and X11, which all ran in the Andrew Project environment. The Hip-PC included an Agenda palmtop used as a chording keyboard attached to the belt and a 1.44 megabyte floppy drive. Later versions incorporated additional equipment from Park Engineering. The system debuted at "The Lap and Palmtop Expo" on 16 April 1991. VuMan 1 was developed as part of a Summer-term course at Carnegie Mellon's Engineering Design Research Center, and was intended for viewing house blueprints. Input was through a three-button unit worn on the belt, and output was through Reflection Tech's Private Eye. The CPU was an 8 MHz 80188 processor with 0.5 MB ROM. === 1990s === In the 1990s PDAs became widely used, and in 1999 were combined with mobile phones in Japan to produce the first mass-market smartphone. In 1993, the Private Eye was used in Thad Starner's wearable, based on Doug Platt's system and built from a kit from Park Enterprises, a Pri

  Read more →
• 

  Data augmentation

  Data augmentation is a statistical technique which allows maximum likelihood estimation from incomplete data. Data augmentation has important applications in Bayesian analysis, and the technique is widely used in machine learning to reduce overfitting when training machine learning models, achieved by training models on several slightly-modified copies of existing data. == Synthetic oversampling techniques for traditional machine learning == Synthetic Minority Over-sampling Technique (SMOTE) is a method used to address imbalanced datasets in machine learning. In such datasets, the number of samples in different classes varies significantly, leading to biased model performance. For example, in a medical diagnosis dataset with 90 samples representing healthy individuals and only 10 samples representing individuals with a particular disease, traditional algorithms may struggle to accurately classify the minority class. SMOTE rebalances the dataset by generating synthetic samples for the minority class. For instance, if there are 100 samples in the majority class and 10 in the minority class, SMOTE can create synthetic samples by randomly selecting a minority class sample and its nearest neighbors, then generating new samples along the line segments joining these neighbors. This process helps increase the representation of the minority class, improving model performance. == Data augmentation for image classification == When convolutional neural networks grew larger in mid-1990s, there was a lack of data to use, especially considering that some part of the overall dataset should be spared for later testing. It was proposed to perturb existing data with affine transformations to create new examples with the same labels, which were complemented by so-called elastic distortions in 2003, and the technique was widely used as of 2010s. Data augmentation can enhance CNN performance and acts as a countermeasure against CNN profiling attacks. Data augmentation has become fundamental in image classification, enriching training dataset diversity to improve model generalization and performance. The evolution of this practice has introduced a broad spectrum of techniques, including geometric transformations, color space adjustments, and noise injection. === Geometric Transformations === Geometric transformations alter the spatial properties of images to simulate different perspectives, orientations, and scales. Common techniques include: Affine Transformation Rotation: Rotating images by a specified degree to help models recognize objects at various angles. Reflection: Reflecting images horizontally or vertically to introduce variability in orientation. Translation: Shifting images in different directions to teach models positional invariance. Scaling Shear Mapping Cropping: Removing sections of the image to focus on particular features or simulate closer views. Elastic Distortion Morphing within the same class: Generating new samples by applying morphing techniques between two images belonging to the same class, thereby increasing intra-class diversity. === Color Space Transformations === Color space transformations modify the color properties of images, addressing variations in lighting, color saturation, and contrast. Techniques include: Brightness Adjustment: Varying the image's brightness to simulate different lighting conditions. Contrast Adjustment: Changing the contrast to help models recognize objects under various clarity levels. Saturation Adjustment: Altering saturation to prepare models for images with diverse color intensities. Color Jittering: Randomly adjusting brightness, contrast, saturation, and hue to introduce color variability. === Noise Injection === Injecting noise into images simulates real-world imperfections, teaching models to ignore irrelevant variations. Techniques involve: Gaussian Noise: Adding Gaussian noise mimics sensor noise or graininess. Salt and Pepper Noise: Introducing black or white pixels at random simulates sensor dust or dead pixels. == Data augmentation for signal processing == Residual or block bootstrap can be used for time series augmentation. === Biological signals === Synthetic data augmentation is of paramount importance for machine learning classification, particularly for biological data, which tend to be high dimensional and scarce. The applications of robotic control and augmentation in disabled and able-bodied subjects still rely mainly on subject-specific analyses. Data scarcity is notable in signal processing problems such as for Parkinson's Disease Electromyography signals, which are difficult to source - Zanini, et al. noted that it is possible to use a generative adversarial network (in particular, a DCGAN) to perform style transfer in order to generate synthetic electromyographic signals that corresponded to those exhibited by sufferers of Parkinson's Disease. The approaches are also important in electroencephalography (brainwaves). Wang, et al. explored the idea of using deep convolutional neural networks for EEG-Based Emotion Recognition, results show that emotion recognition was improved when data augmentation was used. A common approach is to generate synthetic signals by re-arranging components of real data. Lotte proposed a method of "Artificial Trial Generation Based on Analogy" where three data examples x 1 , x 2 , x 3 {\displaystyle x_{1},x_{2},x_{3}} provide examples and an artificial x s y n t h e t i c {\displaystyle x_{synthetic}} is formed which is to x 3 {\displaystyle x_{3}} what x 2 {\displaystyle x_{2}} is to x 1 {\displaystyle x_{1}} . A transformation is applied to x 1 {\displaystyle x_{1}} to make it more similar to x 2 {\displaystyle x_{2}} , the same transformation is then applied to x 3 {\displaystyle x_{3}} which generates x s y n t h e t i c {\displaystyle x_{synthetic}} . This approach was shown to improve performance of a Linear Discriminant Analysis classifier on three different datasets. Current research shows great impact can be derived from relatively simple techniques. For example, Freer observed that introducing noise into gathered data to form additional data points improved the learning ability of several models which otherwise performed relatively poorly. Tsinganos et al. studied the approaches of magnitude warping, wavelet decomposition, and synthetic surface EMG models (generative approaches) for hand gesture recognition, finding classification performance increases of up to +16% when augmented data was introduced during training. More recently, data augmentation studies have begun to focus on the field of deep learning, more specifically on the ability of generative models to create artificial data which is then introduced during the classification model training process. In 2018, Luo et al. observed that useful EEG signal data could be generated by Conditional Wasserstein Generative Adversarial Networks (GANs) which was then introduced to the training set in a classical train-test learning framework. The authors found classification performance was improved when such techniques were introduced. === Mechanical signals === The prediction of mechanical signals based on data augmentation brings a new generation of technological innovations, such as new energy dispatch, 5G communication field, and robotics control engineering. In 2022, Yang et al. integrate constraints, optimization and control into a deep network framework based on data augmentation and data pruning with spatio-temporal data correlation, and improve the interpretability, safety and controllability of deep learning in real industrial projects through explicit mathematical programming equations and analytical solutions.

  Read more →
• 

  Information flow

  In discourse-based grammatical theory, information flow is any tracking of referential information by speakers. Information may be new, i.e., just introduced into the conversation; given, i.e., already active in the speakers' consciousness; or old, i.e., no longer active. The various types of activation, and how these are defined, are model-dependent. Information flow affects grammatical structures such as: Word order (topic, focus, and afterthought constructions). Active, passive, or middle voice. Choice of deixis, such as articles; "medial" deictics such as Spanish ese and Japanese sore are generally determined by the familiarity of a referent rather than by physical distance. Overtness of information, such as whether an argument of a verb is indicated by a lexical noun phrase, a pronoun, or not mentioned at all. Clefting: Splitting a single clause into two clauses, each with its own verb, e.g. ‘The chicken turtles tasted like chicken.’ becomes ‘It was the chicken turtle | that tasted like chicken.’ In this case, clefting is used to shift the focus of the sentence to the subject, the chicken turtle. Front focus: Placing at the start (front) of a sentence information that would normally occur later in the sentence, to give it extra prominence. For example, in pop culture, Yoda's speech often utilizes such syntactic construction, such as when he says 'much to learn you still have' to Luke Skywalker. End focus (or end weight): Given or familiar information followed by new information. This gives prominence to the final part of the sentences and can enable suspense to build, e.g. ‘Through the door came a gigantic wolf’.(Umer Prince)

  Read more →
• 

  Synthetic data

  Synthetic data are artificially generated data not produced by real-world events. Typically created using algorithms, synthetic data can be deployed to validate mathematical models and to train machine learning models. Data generated by a computer simulation can be seen as synthetic data. This encompasses most applications of physical modeling, such as music synthesizers or flight simulators. The output of such systems approximates the real thing, but is fully algorithmically generated. Synthetic data is used in a variety of fields as a filter for information that would otherwise compromise the confidentiality of particular aspects of the data. In many sensitive applications, datasets theoretically exist but cannot be released to the general public; synthetic data sidesteps the privacy issues that arise from using real consumer information without permission or compensation. == Usefulness == Synthetic data is generated to meet specific needs or certain conditions that may not be found in the original, real data. One of the hurdles in applying up-to-date machine learning approaches for complex scientific tasks is the scarcity of labeled data, a gap effectively bridged by the use of synthetic data, which closely replicates real experimental data. This can be useful when designing many systems, from simulations based on theoretical value, to database processors, etc. This helps detect and solve unexpected issues such as information processing limitations. Synthetic data are often generated to represent the authentic data and allows a baseline to be set. Another benefit of synthetic data is to protect the privacy and confidentiality of authentic data, while still allowing for use in testing systems. Computer security experts claim generated synthetic data "... enables us to create realistic behavior profiles for users and attackers. The data is used to train the fraud detection system itself, thus creating the necessary adaptation of the system to a specific environment." In defense and military contexts, synthetic data is seen as a potentially valuable tool to develop and improve complex AI systems, particularly in contexts where high-quality real-world data is scarce. At the same time, synthetic data together with the testing approach can give the ability to model real-world scenarios. == History == Scientific modelling of physical systems has a long history that runs concurrent with the history of physics. For example, research into synthesis of audio and voice can be traced back to the 1930s and before, driven forward by the developments of the telephone and audio recording technologies. Digitization gave rise to software synthesizers from the 1970s onwards. In the context of privacy-preserving statistical analysis, in 1993, the idea of original fully synthetic data was created by Donald Rubin. Rubin originally designed this to synthesize the Decennial Census long form responses for the short form households. He then released samples that did not include any actual long form records - in this he preserved anonymity of the household. Later that year, the idea of original partially synthetic data was created by Little. Little used this idea to synthesize the sensitive values on the public use file. A 1993 work fitted a statistical model to 60,000 MNIST digits, then it was used to generate over 1 million examples. Those were used to train a LeNet-4 to reach state of the art performance. In 1994, Stephen Fienberg introduced 'critical refinement', in which a parametric posterior predictive distribution (instead of a Bayes bootstrap) is used to do the sampling. Later, other important contributors to the development of synthetic data generation were Trivellore Raghunathan, Jerry Reiter, Donald Rubin, John M. Abowd, and Jim Woodcock. Collectively they came up with a solution for how to treat partially synthetic data with missing data. Similarly, they developed the technique of Sequential Regression Multivariate Imputation. == Calculations == Researchers test the framework on synthetic data, which is "the only source of ground truth on which they can objectively assess the performance of their algorithms". Synthetic data can be generated through the use of random lines, having different orientations and starting positions. Datasets can get fairly complicated. A more complicated dataset can be generated by using a synthesizer build. To create a synthesizer build, first use the original data to create a model or equation that fits the data the best. This model or equation will be called a synthesizer build. This build can be used to generate more data. Constructing a synthesizer build involves constructing a statistical model. In a linear regression line example, the original data can be plotted, and a best fit linear line can be created from the data. This line is a synthesizer created from the original data. The next step will be generating more synthetic data from the synthesizer build or from this linear line equation. In this way, the new data can be used for studies and research, and it protects the confidentiality of the original data. David Jensen from the Knowledge Discovery Laboratory explains how to generate synthetic data: "Researchers frequently need to explore the effects of certain data characteristics on their data model." To help construct datasets exhibiting specific properties, such as auto-correlation or degree disparity, proximity can generate synthetic data having one of several types of graph structure: random graphs that are generated by some random process; lattice graphs having a ring structure; lattice graphs having a grid structure, etc. In all cases, the data generation process follows the same process: Generate the empty graph structure. Generate attribute values based on user-supplied prior probabilities. Since the attribute values of one object may depend on the attribute values of related objects, the attribute generation process assigns values collectively. == Applications == === Fraud detection and confidentiality systems === Testing and training fraud detection and confidentiality systems are devised using synthetic data. Specific algorithms and generators are designed to create realistic data, which then assists in teaching a system how to react to certain situations or criteria. For example, intrusion detection software is tested using synthetic data. This data is a representation of the authentic data and may include intrusion instances that are not found in the authentic data. The synthetic data allows the software to recognize these situations and react accordingly. If synthetic data was not used, the software would only be trained to react to the situations provided by the authentic data and it may not recognize another type of intrusion. === Scientific research === Researchers doing clinical trials or any other research may generate synthetic data to aid in creating a baseline for future studies and testing. Real data can contain information that researchers may not want released, so synthetic data is sometimes used to protect the privacy and confidentiality of a dataset. Using synthetic data reduces confidentiality and privacy issues since it holds no personal information and cannot be traced back to any individual. Beyond privacy protection, synthetic data is also being explored for methodological innovation in drug development. For instance, synthetic data may be used to construct synthetic control arms as an alternative to conventional external control arms based on real-world data (RWD) or randomized controlled trials (RCTs). Collectively, regulatory agencies such as the FDA and EMA appear to be at various stages of recognizing and integrating AI-generated synthetic data into their methodologies. While there is growing consensus on the potential of such data to support model development and the broader lifecycle of medicinal products, to date no drug or medical device has been approved using solely or predominantly synthetic data—particularly not as a comparator arm generated entirely via data-driven algorithms. The quality and statistical handling of synthetic data are expected to become more prominent in future regulatory discussions, particularly in contexts such as predictive modeling (e.g., digital twins), where innovative approaches have already been referenced. === Machine learning === Synthetic data is increasingly being used for machine learning applications: a model is trained on a synthetically generated dataset with the intention of transfer learning to real data. Efforts have been made to enable more data science experiments via the construction of general-purpose synthetic data generators, such as the Synthetic Data Vault. In general, synthetic data has several natural advantages: once the synthetic environment is ready, it is fast and cheap to produce as much data as needed; synthetic data can have perfectly accurate labels, including labeling that may be very expensive or impo

  Read more →